Hot Water Service Magnesium 1686mm Anode

Name: Hot Water Service Magnesium 1686mm Anode
SKU: Magnesium 1686mm Anode
Availability: InStock

$95.00 Including GST

Used in Electric hot water units Rinnia / Beasley 400, Vulcan 400, Rheem 400, Hardie / Dux 400 Liter Hot Water heaters systems, Measure 1686mm long

In stock

SKU: Magnesium 1686mm Anode Category: Hot Water Service Anode

Hot Water Service Magnesium anode rod

Material: Magnesium

NOTE: We can’t send Australia Post this item is courier only!!

Used in Electric hot water units Rinnia / Beasley 400, Vulcan 400, Rheem 400, Hardie / Dux 400 Liter Hot Water heaters systems

Measure 1686mm long

Fits standard 3/4 inch BSP fitting.

Anode rods extend the life of you water tank and should be checked regularly. Replace when 75% of the anode rod has been consumed.

What is a sacrificial anode?

Most tank-based hot water systems feature what’s known as a ‘sacrificial anode’. A sacrificial anode is a metal rod, normally made from aluminium or magnesium and coated in zinc, which hangs down inside your hot water tank.The sacrificial anode is designed to attract minerals and impurities in the water which would otherwise react with the inside of the tank and cause it to rust and deteriorate. This ‘sacrificial’ rod slowly rusts and degrades, sacrificing its own life for the greater good of your hot water tank.

Perhaps the most important aspect of hot water system maintenance is routinely replacing your sacrificial anode as and when necessary.