Solar Tempering Valve

Solar Tempering Valve

• The orange cap Logi hot water tempering valve are a valve used in the process of mixing hot and cold water to deliver tempered water at a continuous temperature throughout a solar hot water system.  The solar hot water tempering valve is appropriate for tempering the hot water to supply outlets used for personal hygiene purposes where the outlet temperature must not exceed the maximum of 50°C. FEATURES|
  
• Integral Mesh Strainers
• Cast DR Brass Body
• Integral Non return Valves
• Innovative Polymers for Greater Resistance to calcium deposits
• Factory set at 50°C (must be commissioned on site)
• Tamper Proof Adjustment
• Tested and Certified to AS 4032.2
• Insulation Jacket Provided as per AS4032.2

Specifications

•  Cold Water Supply Temperature: 5˚C – 30˚C
• Hot Water Supply Temperature: 60˚C – 99˚C
•  Set Temperature: 50˚C standard (must be commissioned onsite by installer)
•  Adjustable Temperature: 40 – 50˚C 
• Accuracy of Outlet Temperature: +/- 3˚C (as per AS4032.2)
• Maximum Working Pressure (Static): 1400Kpa
• Maximum Working Pressure (Dynamic): 500Kpa
• Minimum Flow Rate: 3.6L/min under outlet pressure 10Kpa(
• All hard wired electrical items must be installed by a licenced electrician)

(All plumbing items must be installed by a licenced plumber)