Reverse Osmosis Membrane Housing, Push In Fittings
Suitable for most residential RO systems up to 100 GPD, Push in fitttings that connects to 1/4″ tubing.
The Reverse Osmosis Membrane Housing accepts all 12" standard size membranes and is manufactured using the highest quality FDA grade polypropylene. The RO membrane housing inlet/outlet ports are 1/4". The waste drain (brine) and filtered water product (permeate) ports exit at 90°.
Reverse Osmosis Membrane Housing Specifications
● Connectors included
● Maximum pressure 100 PSI
● Maximum temperature 38c
● O-Ring NBR compound rubber
● Inlet Port 1/4" Tube
The Waste ( Brine ) port requires an external flow control (flow restrictor) that is sized to the membrane capacity, typically a 3:1 ratio.
Please enter a valid email address.
This field is required.